| |||||||
| FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
| | LinkBack | Thread Tools | Display Modes |
|
#1
| |||
| |||
| Hi, Just got an X1 through Vodafone and tried using it for the last half hour and its virtually unusable, it doesnt seem to respond to the stylus at all, some things are really responsive to press with my finger, others its like i need to break the screen. I couldnt complete the initial setup due to it not responding to virtually anything I did, the calibration seemed to go ok although i had to press the screen pretty hard to get a response. Could I have set this up wrong or is my phone in someway damaged perhaps? Bit gutted at the moment, been patiently waiting for this phone for so long and at the moment its garbage ![]() Many thanks for any advice, its appreciated. Cheers, Ash |
|
#2
| |||
| |||
| As already posted somewhere else: It is very important how you set up your touchsreen. It calibrates to you. So if you plan to use a screen protector, put it on the screen before you start. If you plan to use the stylus, initiate the screen with the stylus. The sensitivity is also calibratet depending on how hard you tap the screen. In order to make the most of it, go back to the settings -> screen -> align and do it with feeling ![]() HTH
__________________ Early in life, I had to choose between honest arrogance and hypocritical humility. I chose honest arrogance and have seen no occasion to change. - Frank Lloyd Wright |
|
#8
| |||
| |||
| Quote:
http://www.portable-devices.net/wp-c...ormal_X1_3.jpg The detailed status is here: Settings -> System -> Power
__________________ Early in life, I had to choose between honest arrogance and hypocritical humility. I chose honest arrogance and have seen no occasion to change. - Frank Lloyd Wright |
![]() |
| Thread Tools | |
| Display Modes | |
| |